1. The 315w ceramic metal halide grow light has the greatest advantage of high luminous efficiency, and the light efficiency is up to 80-90 Lm/W. There is less heat during normal luminescence, so it is a cold light source; it combines the advantages of fluorescent lamp, high-pressure mercury lamp and high-pressure sodium lamp, overcoming the shortcomings of these lamps, which is a new energy-saving light source close to daylight, and is also the most advanced type of light source in the current lamp market.
2. The color rendering performance of 315w ceramic metal halide grow light is obviously better than that of quartz metal halide lamp. Because the spectrum of 315w ceramic metal halide grow light is based on continuous spectrum with dense linear spectrum, the color rendering index is particularly high, that is, the color reducibility is very good, up to 90%. In addition, the color temperature of metal halide lamp is high, up to 5000-6000K. Under the same brightness condition, the higher the color temperature is, the brighter the human eyes feel. This is also the advantage of 315w ceramic metal halide grow light.
Disadvantages of 315W Ceramic Metal Halide Grow Light
1. The 315w ceramic metal halide grow light has a short service life, which is one of its major shortcomings. The 315w ceramic metal halide grow light has high brightness and small volume.
2. Another disadvantage of 315w ceramic metal halide grow light is that it is difficult to start, so special trigger must be used. The brightness system increases gradually after starting. If the starting energy is too large and the starting speed is too fast, the gallbladder of metal halide lamp will be burnt out. Therefore, when installing and designing this type of lamp, the circuit design should be fully considered.